CTX118840
XenServer
XenServer 6_2_0,XenServer 6_1_0,XenServer 6_0
Configuration
2016-04-15
2014-05-26
This article describes how to add a permanent search domain entry in the resolv.conf file of a XenServer Host.

Objective

This article describes how to add a permanent search domain entry in the resolv.conf file of a XenServer Host. When manually editing the resolv.conf file to add search domains, the entries are not persistent after a XenServer Host reboot.??


Instructions

The following are the requirements:

  • XenServer 5.0 and later

  • Access to the command line interface of the XenServer host

  • The Network Interface Cards (NICs) on the XenServer host must be configured with a static IP address??

Complete the??following procedure:

  1. To identify the management NIC on a given host run, run the following command:
    xe pif-list host-name-label=<hostname of the xenserver to modify> management=true

  2. To add the static search domain entry to the resolv.conf:
    xe pif-param-set uuid=<pif uuid> other-config:domain=searchdomain.net

  3. Reboot the XenServer Host.

  4. The??cat /etc/resolv.conf??displays the search domain entry.

Note: Multiple search domain entries can be entered separated by commas:
xe pif-param-set uuid=<pif uuid> other-config:domain=searchdomain.net,searchdomain2.net


 

Join the conversation

Citrix Discussions

Open a case

Citrix Support

特别说明


本文来源为Citrix.com所有,翻译后版权归翻译者所有.如需转载请注明出处.

文档版本


.

广告招租


最新留言


.

广告招租


.